40 Huntingwood Drive Huntingwood NSW 2148
Phone: (02) 8825 1999 Website:
INSTALLATION MANUAL
AEROFLOW PERFORMANCE
LS CHEV OIL PAN
WARNING!
BEFORE PROCEEDING WITH INSTALLATION PLEASE READ INSTRUCTIONS CAREFULLY. THIS PRODUCT REQUIRES
DETAILED KNOWLEDGE OF AUTOMOTIVE SYSTEMS. WE RECOMMEND THAT THIS INSTALLATION BE CARRIED
OUT BY A QUALIFIED AUTOMOTIVE TECHNICIAN.
INTRODUCTION
Congratulations on your purchase of Aeroflow Performance LS Chev oil pan. Aeroflow Performance products
cannot and will not be responsible for any damage, or other conditions resulting from misapplication of the
parts described herein. However, it is our intention to provide the best possible products for our customer,
products that perform properly and satisfy your expectations. Should you have any questions? Please call
technical support at +61 2 8825 1900 and have the product part number on hand when calling.
This product is designed to suit LS Chev engines. It is a fabricated rear sump oil pan designed to use in engine
conversions. Examples of these engine conversions include Holden WB-HQ, 1968-1972 Nova, 1965-1972
Chevelle and 1967-1969 Camaro. This oil pan can also be used in additional applications (please check
dimensions at the end of these instructions for clearance).
It holds 5.5 litres of engine oil and uses the standard stock block mounted dipstick.
This race oil pan will utilize the OEM oil filter setup with an oil filter attachment included in this kit. This oil
filter attachment can also be purchased separately AF59-2012. Ensure to check clearance and location when
using this oil filter attachment for your application. It may or may not be in a convenient location to access on
a regular basis to change the oil filter.
If this is the case Aeroflow Performance have several different options available ( sold separately ) to suit your
application. The oil filter adapter block AF82-2022 is similar to the one included in this kit instead of the oil
filter hanging down vertically it mounts the oil filter horizontally or at a 90 degree angle. The oil block AF82-
2013 has 2 x female -10 ORB fittings attached to the block. This will allow an external oil filter and/or oil cooler
setup to be ran such as AF64-4112, AF64-2075 or AF64-2061. This will need to be adapted to suit your
application.
This race oil pan features a trap door setup to keep oil within the oil pick up area under any condition. The
OEM windage tray may be used with this pan or purchase separately the Aeroflow Performance windage tray
AF82-2020 for improved oil control in any application.
