
Model 8210A-2-5
IM-377
Aeroflex / Weinschel
42
7-22. Switch Protocol Commands
DEVICE SET
Function:
Sets the output of a device
Syntax:
DEVICE SET
addr setting
Argument(s):
addr
integer
address setting word output setting
Remarks:
This function is used set the output of a device.
Return Value:
none
Example(s):
DEVICE ATTN 4 255
DEVICE? SET
Function:
Reads the program word of a device
Syntax:
DEVICE SET
addr
Argument(s):
addr
integer
address setting word output setting
Remarks:
This function is used to read the output setting of the device.
Return Value:
setting
word
output
setting
Example(s):
DEVICE? SET 4 returns ’170’
DEVICE SETMASK
Function:
Sets the output of a device using a mask value
Syntax:
DEVICE SETMASK
addr setting mask
Argument(s):
addr
integer
address
setting
word
output setting
mask
word
output mask
Remarks:
This function is used set the output of a device, using a mask value. Only those
outputs with a mask value of ’1’ will be effected.
Return Value:
none
Example(s):
DEVICE SETMASK 4 7 0x0F
DEVICE RELAY
Function:
Sets the specified output relay on/off
Syntax:
DEVICE RELAY
addr relay setting
Argument(s):
addr
integer
address
relay
byte
relay # (1-8)
setting
byte
1=on, 0=off
Remarks:
This function is used to program the specified relay.
Return Value:
none
Example(s):
DEVICE RELAY 4 7 1
DEVICE? RELAY
Function:
Reads the specified relay setting
Syntax:
DEVICE? RELAY
addr relay
Argument(s):
addr
integer
address
relay
byte
relay # (1-8)
setting
byte
1=on, 0=off
Remarks:
This function is used to read the specified relay setting.
Return Value:
setting
byte
1=on, 0=off
Example(s):
DEVICE? RELAY 4 7 returns ’1’
DEVICE RELAY CONG
Function:
Reads the entire configuration structure of a device’s internal EEPROM
Syntax:
DEVICE? READ CONFIG
addr
Argument(s):
addr
integer
address
Remarks:
This function is used to read the setting of the device’s configuration EEPROM.
Return Value:
SwitchConfig structure. refer to the SmartStep Programmers Reference
for a discussion.
Example(s):
DEVICE? READ CONFIG 4
Summary of Contents for 8210A-2-5
Page 52: ......