AEROCOMPACT CompactGROUND G15, Assembly Instructions Manual

Page: 19 / 24

G
15
|
G
2
0
Assembly
www.aerocompact.com 19
Make sure that the ground screws are fully
anchored into the ground at the appropriate feet
and/or connectors.
Option 2: Ballasting directly on the feet or connectors
With this ballasting option, the ballast blocks are placed directly on the feet or connectors.
Take note of the exact number and position of the ballast blocks from the AEROTOOL planning doc-
uments.
PADS ARE NOT USED ON GROUND MOUNTS
Place the ballast blocks across the feet/connectors
.
Option 3: Short ballast tray
The short ballast tray can be installed in the following positions:
at the front foot.
on the connector.
at the back foot.
Refer to the Aerotool planning documents for the exact number and position of the short ballast trays.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+