G
15
|
G
2
0
Assembly
www.aerocompact.com
18
Installing Microinverters - US (optional)
The microinverter can be installed directly on the module.
Observe the manufacturer's specifications (PV module, microinverter) during installation.
Install the Solar-ClamP according to the manufacturer's instructions.
Installing Microinverters - EU (optional)
The microinverter can be mounted below the module on a foot or on a support.
Install the microinverter on the bracket according to the manufacturer's specifications.
Place installed microinverter
on the support / on a foot
below the module
.
Attach the clamp to the support/foot
and hand-tighten the Allen screw
.
Securing the system
Depending on the circumstances, the system can be secured in various ways.
Option 1: Securing with ground screws
The ground screws are used to anchor the feet or connectors to the ground.
Refer to the AEROTOOL planning documents for the exact number and position of the ground screws.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
