TRACKING
: (see FIG. 2) All skis are placed in a jig so that the wheels are
perfectly aligned with the shaft. This does not guarantee that the ski will
track straight for the user. Very few people are perfectly aligned
anatomically, and boots and bindings may also be slightly misaligned. The
tracking device is the small aluminum piece, rectangular in shape but
rounded at one end, attached to the front fork between the lock nut that
holds the wheel axle bolt and the fork. Scribe a pencil line on the fork along
the edge of the tracking device. If your ski is tracking to the right, loosen
the lock nut and move the tracking devise slightly forward and retighten. If
the ski tracks left, move the devise slightly toward the rear. Adjust
incrementally until the skis track properly for your physiology.
WARRANTY
: Jenex Inc. warrants to the original purchase of V2 roller skis,
that Jenex will repair free of charge any item that under
normal service
proves defective in material or workmanship,
as determined by Jenex inspection, for a period of 24 months from the date of purchase. The claimed defective
product must be returned to Jenex with transportation charges prepaid.
Warranty applies only if the skier weight is less than
195lb (89 kg) on the XL150RC, or 160lb (72 kg) on the XL125RC
.
Warranty does not include wear items like wheels, speed reducers and brake pads. Warranty does not cover tires and
tubes. The chassis (shafts and fork assemblies) are not warrantied if there is substantial stress damage such as deep
scrape and gouge marks on the bottom of the shafts and fork assembly.
V2 Jenex, Inc. 172B South St. Milford, NH 03055
603-672-2600 [email protected] www.jenex.com