background image

NOTE: THIS FAN MUST BE INSTALLED BY A LICENSED AND QUALIFIED 

 

ELECTRICIAN IN ACCORDANCE WITH LOCAL AUTHORITY REGULATIONS 

17

1. 

Any damage incurred after delivery to the owner that is not caused by a fault in the products materials or 

workmanship; damage from lightning or power surges; incorrect installation; damage due to incorrect installation; 

noise or other influence of ripple control or information access systems operated over power delivery infrastructure; 

water damage of any kind; installation or use outdoors; damage arising from connection to or use with alternative 

power systems (e.g. inverters, solar, etc.).

2. 

Interference from other devices operating on the same frequency. This issue can be overcome by 

reprogramming the remote control hand piece to the Fan. A mechanism to isolate power is highly required, this 

will remove the requirement to engage a licensed electrician to complete the programming steps.

3. 

Ceiling fans not installed by a licensed and qualified electrician in accordance with local authority regulations.

4. 

Incorrect operation of the ceiling fan, accidental damage, modification in any way or not servicing in accordance 

with the maintenance instructions.

5. 

Travelling costs incurred by AeroDC personnel or service agents exceeding 50kms between the nearest agents’ 

service depot and the customer. These costs must be met by the purchaser. 

6. 

Subject to any statutory provisions to the contrary, claims for damage to furniture, carpet, walls, ceilings, 

foundations or any other consequential loss either directly or indirectly resulting from a faulty ceiling fan.

7. 

Signals sent through the mains power supply by the electricity supplier for off peak hot water, and other signals 

including those for street lights and such. These signals may cause an intermittent humming in the ceiling fan. It 

is not the fault of the ceiling fan.

8. 

When humidity is high and temperature drops moisture condenses on metal surfaces including ceiling fans. The 

layer of moisture can be almost microscopic but it will affect the surface by depositing a tiny layer of dissolved 

salts or airborne acidic compounds and thus eventually leading to corrosion if the product is not properly and 

regularly cleaned.

9. 

A service call fee will be charged where; there is nothing wrong with the ceiling fan or; the defective operation of 

the ceiling fan is due to failure of electricity or; the installation is not in accordance with AeroDC instructions and/

or applicable local regulations or; the defects have been caused by incorrect application or abuse of the ceiling fan 

or; the damage has been caused by unauthorised persons attempting to repair the fan

NOT COVERED BY WARRANTY.

DOCUMENTS TO RETAIN FOR FUTURE WARRANTY CLAIMS

TO ASSIST WITH ANY WARRANTY CLAIMS ATTACH THE FOLLOWING DOCUMENTS FOR  

FUTURE REFERENCE.

1. 

Copy of the Purchasing Receipt. 

2. 

Proof of Professional Installation - in-accordance with local authority Regulations (copy of installation Invoice, 

Safety Certificate or letter on Letter head including licence details) 

Summary of Contents for Storm 52





















Reviews: