Aero PowerLock, Installation Instructions Manual

Page: 21 / 32

PowerLock ™
FOR GRAIN TRAILERS
21
Installation Instructions
1) See Figures 53 & 54. Remove bottom collar and insert electric cord
and swing arm assembly through the spring assembly.
2) See Figure 54.
Slide lock collar over the power cable and onto the
front swing-arm and tighten 5/16-18 x 1" bolt W/ nylon patch thru hole
in tube and tighten second bolt against tube.
Figure 54
Front Swing Arm Assembly
Spring Assembly
Remove collar before inserting
into Spring Assembly
Figure 55
Step 9
Install PowerLock™ Swing Arm Assembly (Front and Rear)
  

Figure 53
Figure 56
Figure 57
Rear Swing Arm Assembly
Spring Assembly
Remove collar before inserting
into Spring Assembly
3) See Figures 56 & 57.
Remove bottom collar insert
swing arm assembly through
the spring assembly.
4) See Figure 55 & 57.
Place collar back on bottom
of swing arm.