9
Pressing the
FA
N
button, If the unit is on (and the automatic or dehumidification
modes are not selected), allows the selection of the fan speed. Pressing the but-
ton allows changing the fan speeds as shown in the icons below, in the following
sequence:
AUTO
Note:
1.
When operation mode changes, fan speed is memorized.
2.
Under dry mode, fan speed is low and cannot be adjusted.
3.6 SETTING THE MOTORISED VERTICAL DISCHARGE FIN
(SWING)
Motorised discharge vertical fin setting
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
SLEEP
WiFi
If the unit is on, pressing the
button allows the activation of the swing func-
tion of the motorised discharge fin. This fin varies the direction of the flow of air into
the ambient, on the basis of the selected position; With the unit on, pressing the
button allows the setting of the following sequenced steps, one by one:
Closed
Note: operate continuously up & down swing in 2 seconds, swing states will change
according to above-mentioned order, or switch closed state and "
" state.
3.7 SETTING THE MOTORISED HORIZONTAL DISCHARGE
FIN (SWING)
Motorised discharge horizontal fin setting
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
SLEEP
WiFi
If the unit is on, while pressing the
button it activates the swing of the mo-
torized supply air fin. The fin allows to change the air flow in the room depending
on the set position; When the unit is on, while pressing the button it’s possible to
set one by one the following steps:
Closed
Note: operate continuously left & right swing in 2 seconds, swing states will change
according to above-mentioned order, or switch closed state and "
" state.