AERMEC WLRC20, User Manual

Page: 4 / 20

ON/OFF
TURBO
CLOCK T-ON/T-OFF
TEMP
SLEEP
I FEEL SWING
FAN MODE
LIGHT WIFI
QUIET
WIFI
1
2
3
5
7
9
11
4
6
8
10
12
15 13
14
16
17
4
1. REMOTE CONTROL
• Some of the buttons of the remote control are
not used for the required air conditioner and are
therefore not described in these instructions.
Pressing of these buttons will not affect the
operation of the air conditioner.
• Check there are no obstructions between the
receiver and the remote control.
• The maximum distance between the IR receiver and
the remote control is 8 metres, to ensure the signal is
correctly received.
• Position the remote control at least 1 metre away
from TVs, radios, stereos, etc. There may be some
audio and video interference.
• Do not drop or throw the remote control.
• Do not let liquids enter the remote control, and do
not leave it in direct sunlight or in hot places.
• When the remote control sends a signal the symbol
ON/OFF
TURBO
CLOCK T-ON/T-OFF
TEMP
SLEEP
I FEEL SWING
FAN MODE
LIGHT WIFI
QUIET
WIFI
appears on the display, the receiver of the indoor
unit emits a sound to confirm reception of the signal.
Buttons available
on remote control
Index Function of the button:
1
Switches the unit on or off
2
Increase or decrease the value of the active
function:
• External air
• Time
• Start-up timer
• Shut-down timer
3
Operating mode selection
4
Sets the fan speed
5
Sets the operation of the motorised air
discharge fin (swing function)
6
Activates or deactivates the IFEEL function
7
Activates the HEALTH function or the AIR
function
8
Activates or deactivates the SLEEP function
(this function is applicable to the cooling
and heating modes). Once activated this
function will control the unit in order to
maintain an ideal temperature
(this temperature is automatically
calculated and cannot be set)
9
Shows on the indoor unit display the
temperature set-point and the room or
outside air temperature
10
Activates or deactivates the quiet operation
11 Sets the time on the system clock
12
Activates, deactivates or changes the
programmed switch on or switch off timer
13
Activates or deactivates the maximum fan
speed (TURBO)
14
Activates or deactivates the display of
information of the indoor unit
15
Activates or deactivates the WIFI card
16
IR transmitter
17
Liquid crystal display