AERMEC WLRC20, User Manual

Page: 14 / 20

14
NB:
The X-FAN function will remain active also after the
unit is switched off via the remote control. The icon
will remain visible on the display to indicate
that the function is active.
ACTIVATING / DEACTIVATING THE EXTENDED
VENTILATION (X-FAN)
During the operation in cooling or dehumidification
mode the condensate caused by the humidity in the air
is formed on the heat exchanger within the unit.
The X-FAN function allows, when the air conditioner
is off, the ventilation to be extended for two minutes
after the unit is switched off, thereby drying the heat
exchanger.
If the unit is on (and the cooling or dehumidification
mode is selected), pressing the
FAN
button for at
least 2 seconds, allows the activation or deactivation
of this function. On the remote control display, the
icon will appear or disappear to indicate if the
function is activated or deactivated.
Setting the extended ventilation
function
ON/OFF
TURBO
CLOCK T-ON/T-OFF
TEMP
SLEEP
I FEEL SWING
FAN MODE
LIGHT WIFI
QUIET
ACTIVATING OR DEACTIVATING THE WIFI FUNCTION
(ONLY WITH WIFI DEVICE INSTALLED)
Press the button
WIFI
to activate or deactivate the WIFI
device installed on the indoor unit.
The WIFI symbol on the display indicates that the
device is active.
To reset the WIFI device with the factory values, while
the unit is OFF, press at the same time (for at least one
second) the buttons
MODE
and
WIFI
.
Activating or deactivating the
WIFI function
ON/OFF
TURBO
CLOCK T-ON/T-OFF
TEMP
SLEEP
I FEEL SWING
FAN MODE
LIGHT WIFI
QUIET
WIFI