AERMEC UFB Series, Use And Installation Manual

Page: 5 / 16

5 IUFBTY 1503 - 5495900_00
13. GENERAL WARNINGS
The UFB units are manufactured in accord-
ance with recognised technical standards
and safety regulations. They are designed
for the renewal and treatment of ambient
air, and they must be used for the purpose
for which they are intended and their per-
formance characteristics. All contractual
and extra-contractual liabilities causing
damage to persons, animals or objects or
through errors of installation, control or
maintenance or from improper use are
excluded by the Company. Any uses not
expressly indicated in this manual are not
permitted.
Conservation of documentation
Consign the instructions with all the com-
plementary documentation to the user of
the accessory who will assume responsi-
bility for the conservation of the instruc-
tions so that these are always available in
case of need.
Carefully read this document. The execu-
tion of all the works must be carried out
by qualified personnel, in accordance with
the national regulations.
It must be installed in such a way to make
maintenance and/or repair functions
possible.
Do not modify or tamper with the acces-
sory as this may cause danger for which
the manufacturer will not accept any
responsibility for damages caused. The
warranty is voided if the above instruc-
tions are not followed.
SAFETY WARNINGS AND INSTALLATION
STANDARDS
− The unit must be installed by a com-
petent and qualified technician, and
in accordance with the legislation ap-
plicable in the country of installation.
Aermec assumes no responsibility for
damage caused by failure to observe
these instructions.
− Instructions essential for the proper in-
stallation of the equipment are shown
here. The final details to all the opera-
tions are left to the experience of the
installer in accordance with the specific
needs.
− Before commencing any works it is
necessary to CAREFULLY READ THE IN-
STRUCTIONS AND MINIMISE ANY RISKS
BY TAKING APPROPRIATE SAFETY PRE-
CAUTIONS.
− All relevant personnel must be made
aware of the procedures and possible
risks that may arise at the time of instal-
lation of the unit.
− The unit must be installed in such a way
as to make easy ordinary maintenance
(filter cleaning) and special maintenance
as well as access to the grille
− WARNING! : It is absolutely forbidden
the operate the unit without connect -
ing to the ducting system.
− DANGER : The fan is located immediate -
ly beneath the nozzles. It is absolutely
forbidden to insert hands or objects.
Power the unit only after connecting to
the ducting system.
WARNING: The tampering, re -
moval or absence of the identifi -
cation label renders difficult any
operation of installation or main -
tenance.
14. PRODUCT IDENTIFICATION
The fan coil units are identified by:
− PACKING LABEL
that records the product identification
data.
− NAMEPLATE
230V
540W
MODELLO
MODEL
UFB20EH
VERSIONE
VERSION
50Hz
00
YYMMLLPPPPPPXXXX
CCCCCC
~
2.8A
2.6A
T40°C
500W
X