8
3
BASIC FUNCTIONS
3.1 SWITCHING THE UNIT ON AND OFF (ON/OFF)
16:41
2017-05-04 Fri.
Function
Parameter
View
Commission
General
To switch the unit on or off, press the flag shown in the figure; once this is done, the
system will ask for confirmation of the switching on or off through another window
where the on/off command can be confirmed or cancelled.
Note:
1.
Once the voltage supply has been connected for the first start-up, this function
will be set on “Off”;
2.
If the relative function is activated (paragraph "8.3 Activating/deactivating the
memory (On/off memory) p. 25"), the value of this parameter will be stored
in the memory and automatically reset after any possible voltage failure.
3.2 SELECTING A MENU
16:41
2017-05-04 Fri.
Function
Parameter
View
Commission
General
To enter one of the menus available to the user; click on the corresponding icon;
on entering them, each menu (depending on the one selected) will allow you to
browse the various pages or enter other sub-menus linked to specific functions.
Press the HOME icon to return to the main page.