AERMEC CWX250W Installation And User Manual Download Page 15 | Manualshive

Page: 15 / 24

AERMEC CWX250W Installation And User Manual Download Page 15

15

1) ENERGY SAVING PROGRAM

The fan coil operates and the display on the unit lights up.

2) PRESS THE ECONO BUTTON

Can only be activated with the COOL, HEAT, AUTO programs.
The ECONO icon appears on the display and the temperature set point and fan speed

disappears.

The temperature control and fan speed will be performed automatically.

3) PRESS THE ECONO KEY

TO DISCONNECT THE FUNCTION.

4) PRESS THE "SEND" BUTTON

To transmit to the unit the settings visible on the LCD screen of the remote control.

1

2 3

4

1

2 3

1) PRESS THE ON-OFF BUTTON

The fan coil operates and the display on the unit lights up.

2) PRESS THE TURBO BUTTON

Can only be activated with the COOL, HEAT, AUTO programs.
The TURBO icon appears on the display and the temperature set point indications and fan

speed disappear.

The temperature control and fan speed will be automatically performed for a maximum

time of 30 minutes. The fan will work at maximum power.

3) PRESS THE TURBO BUTTON

TO DISABLE THE FUNCTION.

6) PRESS THE "SEND" BUTTON

To transmit to the unit the settings visible on the LCD screen of the remote control.

PROGRAM TURBO

ENERGY SAVING PROGRAM (ECONO)

«
...
13
14
15
16
17
...
»

Summary of Contents for CWX250W

























Reviews:

No comments