13
1) PRESS THE ON/OFF
KEYS
The fan coil comes on and the display is switched on.
2) PRESS THE MODE
KEY
Press the MODE key repeatedly until the word FUN appears on the display
3) PRESS THE FAN
When the FAN key is pressed repeatedly, the system can move to the minimum speed
(F1), medium speed (F2) and high speed (F3) or to the (FA) speed controlled by the
microprocessor.
4) TO DIRECT THE AIR FLOW
To ensure optimum air distribution, adjust the horizontal blades and the vertical
blades in such a way that the air flow does not hit people directly. The vertical air flow
blades must be set manually before starting up the motorised blades.
Never adjust the motorised horizontal blades manually.
When the LOUVER
key is pressed repeatedly, the horizontal blade is adjusted to 4
fixed blade positions, then a swinging blade movement will begin. If you wish to stop
the blade in a particular position, press the LOUVER
key.
When the SWING
key is pressed a swinging blade movement will begin. If you wish
to stop the blade in a particular position, press the
SWING
key again.
5) PRESS THE SEND
KEY
To transmit the new parameters shown on the LCD to the main control unit.
OPERATING IN JUST VENTILATION MODE
This programme is used to move the room air and avoid stagnation. The ventilation
programme is particularly indicated as a support to heating systems without fans, as
when a stove is used to heat the room. All the hot air gathers by the ceiling. When
the unit is set in ventilation mode, the hot air is distributed uniformly throughout the
room.
FAN PROGRAMME
(FAN)
1
2
3
4
5
6