Swift’Light – Rigging manual
13
C. PUTTING THE FAIRINGS ON.
Be careful with the screens as they scratch easily when not in place. Only unpack
them at the last moment.
52. Offer up the left part of the tail cone. Line up the
bottom rear corner with the wheel fairing then
press home the Velcro going forward.
53. With the slide latches open, insert the bushes
into the opening.
54. From the rear angle, press the Velcro following
the rear edge.
55. Close the latches.
56. Offer up the left side and follow the same
procedure.
57. Put in the pins at the rear of the cone in the
corresponding openings then put the 2 semi
cones between the wheel fairing and the tail cone
end.
