background image

 

Diamond Aircraft Industries 

G.m.b.H. 

N.A. Otto-Straße 5 

A-2700 Wiener Neustadt 

Austria 

DAI SI 42NG-007

 

Page 1 of 1

 

4-Nov-2009

 

FT  

  

SERVICE INFORMATION NO. SI-42NG-007    

I. TECHNICAL DETAILS

   

1.1 Airplanes affected:

  

All DA 42 NG and DA 42 M-NG aircraft with G1000 system software versions prior  
to 0670.03 are affected.   

1.2 Subject:

  

GARMIN Software Service Bulletin No. 0945, Revision A 
ATA-Code:  34-00   

1.3 Reason:

  

The  Software  Service  Bulletin  No.  0945,  Revision  A  provides  instructions  for  the  GARMIN 
G1000 System Software upgrade to Version v0670.03.   

1.4 Information:

  

For detailed technical information refer to the GARMIN Software Service Bulletin No. 0945, 
Revision A which is applicable without any further additions or restrictions.    

II. OTHERS

   

The GARMIN Software Service Bulletin No. 0945, Revision A is attached to this SI.  

In case of doubt contact Diamond Aircraft Industries GmbH. 

NOTE:  SI s are used only:  

1) To distribute information from DAI to our customers.  
2) To distribute applicable information/documents from our suppliers to our customers with  
additional information.  
Typically there is no revision service for SI s. Each new information or change of that will be sent  
along with a new SI. 

Summary of Contents for DA 42 M-NG





























Reviews: