EN-6
Repeatedly touch
to change the brightness from 100%, 50%, 25% to 0%.
When selecting 0% brightness,
the Standby and Brightness/Timer buttons
will always keep as 25% brightness.
NOTE :
When the display is in 100% brightness and there is no operations in1 minute, the brightness
will turn to 50%.
When the brightness is 0% and there is any operation of touching buttons, the brightness will
turn to 25%.
8.
When not in use, touch
and press the power switch. Unplug the heater from the mains
socket.
Overheat safety protection
Your heater is fitted with a safety device to switches off the heater in the event of overheating.
Should the overheat protection be triggered, switch off and unplug the heater from the mains socket.
Let the heater completely cool and inspect for blocakge of air inlet or outlet. Then plug in and press
the power switch again and operate as normal.
If the heater fails to operate or the safety device switches the heater off again, return heater to your
nearest service center for examination or repair.
CLEANING AND MAINTENANCE
It is recommended to regularly clean the heater to ensure trouble-free operation.
Before cleaning the heater, switch off and unplug it from the mains socket. Allow it to completely
cool.
Wipe the exterior of the heater with a slightly damp cloth. Allow it to dry before reconnecting it to
the power supply.
Do not use abrasive or chemical cleaning agents.
Do not immerse the heater in water or any other liquid. Do not allow water to enter the heater.
If necessary, remove dust and fluff accumulated inside the heater by running a vacuum cleaner
nozzle over the guards.
SPECIFICATIONS
Ratings: 220-240V~ 50-60Hz
1800-2000W
