EN-5
OPERATION
The heater carries a symbol
‘DO NOT COVER’ to alert the user to the risk of overheating that
exists if the heater is accidentally covered.
When using your heater for the first time, it is normal for the heater to
emit a ‘new heater’ smell, which will disappear after a while.
Ensure good ventilation.
1.
Place the heater on a flat, dry and clean floor.
Position the heater upright on the floor, at least 1 m away from the wall, away from curtains,
furniture or wall coverings.
2.
Plug in the heater.
3.
Touch
to turn on the heater.
4.
Temperature setting :
Repeatedly touch
or
to set the desired temperature from 10°C to 35°C.
Anti-frost function
When the temperature reaches 10°C, touch
once, the anti-frost function will be activated and
the display will show
.
The appliance keeps the room at a temperature of 7°C to avoid freezing.
5.
Power setting :
Repeatedly touch
to set the low or high power setting.
The display will show the corresponding indicator.
6.
Timer setting :
Touch and hold
for about 3 seconds until the display shows “0h”.
While the number “0” is flashing, repeatedly touch
or
to set the time (1/2/3/4/5/6/7/8/9
hours).
The selected time number will flash for about 3 seconds and then stop flashing, indicating the
setting is confirmed.
The display will show the remaining working time and when the set time has elapsed, the heater
will enter the standby state.
7.
Brightness of the display
The default brightness is 100%.
Press this power switch.
You will hear a beep.
The standby button will
be displayed.
Low power
1250W
High power
2000W
