12
Main Menu - Installation - Tuning Wizard -
Manual Scan
Tuning Wizard:
To enter the Tuning Wizard menu you will be asked to input
your password - the default is 0000.
Manual Scan:
Allows you to select and scan a single UHF
channel/frequency. Also displayed is the signal strength
and quality levels of the selected UHF channel/frequency.
Scan Mode
give you the options
All
,
FTA
,
Scrambled
Once you have good signal strength and quality you can
push the OK button to search the selected UHF frequency.
What is good signal strength and quality?
Strength should be between 70-100%
Quality should be 75-100%
These levels are indicative only. If your levels are good but
you are still having reception problems it may be due to RF
interference in your area.
Once you have scanned channels in you will be
prompted to save them or not.
The Progress screen will display any channels found.
