Aerial BlueDry AD810-P Series, Instruction Manual

Page: 13 / 32

TRANSPORT AND INSTALLATION
Page 11 of 27
Installation
Proceed as follows to install and transport the air dehumidifier:
1. Install the air dehumidifier in a place in conformity with the operating conditions on
a flat surface.
2. Ensure that the condensate can always be reliably collected or discharged.
Operating conditions
Air dehumidifiers are intended for mobile or stationary use in closed rooms, on building
sites, in water works, indoor swimming pools, garages and storage rooms.
The air dehumidifiers works without problems in the temperature range from +1 deg. C
to +34 deg. C and in the humidity range from 35 to 95 percent relative humidity.
In case of lower or higher temperatures, the unit switches off automatically. Using the
appliance in rooms with lower temperatures is inefficient and can result in icing.
Storage of the air dehumidifier at impermissible temperature conditions can result in
damage / problems in case of immediate switching-on. In case of storage below 0 °C the
device must first be allowed to acclimatize to the room temperature before use.
Therefore allow the air dehumidifier to adjust to the temperature before switching it on.
The suitable location for the air dehumidifier features:

230 V / 50 Hz power outlet

Flat ground

Free space of 1 meter minimum in front of the air outlet lamellae and air filter,
better more!
Select the location in a way to ensure optimum circulation of the dehumidifier air in your
room.
The air dehumidifier must be installed on a flat ground.
By using a condensation dryer humidity values of 30% r. h. can be
reached. If lower values are required an adsorption dryer must be used.
Ask your technical advisor.
In case of doubts about the operating conditions your technical advisor can help you.