EN
A – 10
9.
Visual Inspection: Check the main filter for pollution. If necessary use a new
filter of the same class (Fig. 4, Pos. 2) and push in rear of the casing in the
direction of the air as indicated (Fig. 4, Pos. 1) be cautious when doing so.
10.
Mount the rear casing with the pre-filter (Fig. 3, Pos. 2) with the snap locks (Fig.
3, Pos. 1).
11.
Check the power cord for damage. If the power cord is damaged, do not
operate the device and ensure that it is disconnected from the mains.
12.
Replace the power cord.
The Device is ready to be used again
Spare Parts And Service
If you have any problems with the device, or need spare parts, contact your dealer
or the customer services.
8
Troubleshooting
If any malfunctions occur, please first check the following points. Should this not
create a solution, consult a specialist.
WARNING
Risk of electric shock and possible property damage
Only the manufacturer or by the manufacturer authorized
companies are allowed to work on the elctrical parts of the
air filter. Within the warranty claims, interventions may only
be carried out by the manufacturer or by people
authorized by the manufacturer. Intervention by non-
authorized people will void any warranty claims.
Problem
Possible cause
Solution
The device does
not start
Faulty power supply or
power cord
Check the power connections.
Check the plug and power cord
for damage.
Let and electrical specialist check
the performance of the
connections.
