Aerfast TS55-14V, Operating Manual

Page: 5 / 84

△
,! WARNING
1. Disconnect battery pack from tool or place the main switch in the locked
or off position before making any adjustments, changing accessories, or
storing the tool. Such preventative safety measures reduce the risk of
starting the tool accidentally.
2. Remove adjusting keys or wenches before turning the tool on . A wrench
or a key that is left attached to a rotating part of the tool may result in
personal injury.
3. Use clamps or other practical way to secure and support the work piece
to a stable platform. Holding the work by hand or against your body is
unstable and may lead to a loss of control.
4. Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools, with sharp cutting edges are less likely to bind and are
easier to control.
5. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool may create a
risk of injury when used on another tool.
Product Safety Instructions
△
,! WARNING
1. Caution
：
To reduce risk of injury, charge only specific type rechargeable
battery packs. Other types of battery packs may burst causing personal
injury and damage.
2. Before using charger, read all instructions and cautionary markings on
battery packs and chargers.
3. Do not expose charger to rain or snow.
4. To reduce the risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
5. Use of an attachment not recommended or sold by the charger
manufacture may result in a risk of fire, electric shock, or injury to
persons.
6. Make sure cord is located so that it will not be stepped on, tripped on,
tripped over, or otherwise subjected damage or stress.
7. Do not operate charger with damaged cord or plug. Replace them
immediately.
8. Do not operate charger if it has received a sharp blow, been dropped, or
otherwise damage in any way, take it to qualified center.
9. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning. Turning off controls will not
reduce this risk.
10. Do not disassemble charger or battery pack, take it to a qualified service
center while repair is required. Incorrect reassembling may result in a
risk of electric shock or fire.
Important Safety Instructions for Charger & Battery Pack
5