22
www.aerex.de
Reco-Boxx ZXR / ZXA / Flat – Operation and maintenance instructions
[03/
2022 ]
7.1 Commissioning with Touchscreen TP-Touch
The hand-held terminal consists of a 4.3” touch screen with a 1,5 metre long cable for connection to the
air handling unit’s control circuit board.
If the hand-held terminal is not used for 20 minutes, it switches over to the sleep mode.
The Touchscreen controller can be used outdoors, but it must be kept at a weatherproof place.
Data:
Operating temperature:
0... + 50 C
Maximum length of the cable: <=100 metres
Protection class:
IP20
Dimensions [mm]:
144x97x20
Power consumption:
1,8 VA
Image management
Start-up
image
Home Screen. See Section 7.1.1.
By default, the home screen will be shown if no
other menu is opened by the user or if selected
in the main menu.
N.B.! The appearance of the image varies
depending on the type of air handling unit and
functions selected.
Main menu. See Section 7.1.2.
The main menu is presented as a rotary menu.
After pressing the “menu”-button at the bottom
left corner of the Home Screen, the rotary menu
will be shown.
At the first start up, the basic setup menu will be
activated automatically. See section 7.1.3. With
also advanced parameter for master selection
“contacts K1-K2-K3 master” (see point 7.1.4): set
no only if the AHU is to be controlled with TAC-
touch control screen rather than with electrical
contacts (see point 7.1.2).
After the commissioning, a message box will pro-
pose to set date and time and eventually switch
automatically to the corresponding screen (see
section “Time and Date” at point 7.1.2)
