background image

 

20 / 36

TF6746_A_NOT_DXA230_REFERENCE 

Aereco S.A.

- General settings

- Email account settings

The emailing feature aims the communication of a possible system warning or a fatal error to the 
interested people. We suggest one email address should specify the owner’s one and the second 
email address should specify the technician in charge of the maintenance. The contact field may 
contain some information providing the maintenance technician with the needed customer contact.

The essential points describing the emailing feature are:

1. The emailing of the warnings feature may be enabled/disabled.

2. When enabled, the system send email to one, two or three recipients. Two recipient email 
addresses are configurable. The third recipient is the manufacturer, it is predefined and it is 
mandatory when you enable this feature.

3. There is a button to test the configuration. When you click it, the system sends email letting you 
to check the connectivity.

4. The information sent is: 

 

a. Date and time,

 

b. Recipients email addresses

 

c. The text from the contact field

 

d. The status of the system including the event, the devices composing the system,  

 

their serial number, hardware version, software version, functioning parameters when  

 

the event happened. The status information is sent as a link onto the manufacturer  

 cloud.

5. The manufacturer collects only the status information in anonymous fashion. The text from 
contact field and the email addresses are discarded.

6. To be able to email, the system needs to be connected to Internet through the local LAN (Station 
Mode)

7. If you are concerned about the privacy issues you may simply disable the emailing system.

 

3) LANGUAGE :

Shortcut to Maintenance / general settings with no need of user name and password.

 

4) SETTINGS :

This menu allows to configure Automatic mode, free cooling mode, Boost mode, Absence mode 
and Stop mode within a choice of airflows set points and duration set points.

Automatic mode

, the DXA unit drives the exhaust fan motor in such a way that supplky and 

exhaust airflows are constant airflows (80 m

3

/h, 140 m

3

/h, 200 m

3

/h or 230 m

3

/h). At the supply, 

supply fan motor runs in such a way that at all time, amount exhaust airflows and amount supply 
airflows are mass-balanced. 

Summary of Contents for DXA 230 REFERENCE





































Reviews: