aerauliqa QR280ABP Installation Manual Download Page 11

Page: 11 / 24

User menu

1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu

It allows to select the Boost speed.

Press Ok to select.

Choice NO or YES using





Press Ok to select.

Boost speed can be selected only if the Mode selection is 3V or HOLIDAY.

Boost function can be activated in these ways:

- In the user menu, with the Boost function

- via the BOOST button on the CTRL-DSP (Fig. 7.b - )

- Using a momentary switch connected to the BST ON/OFF (only if no dehumidifier is

installed) - Fig. 5.g.

When Boost is active, the icon

is displayed on the LCD and the unit runs at 100%

speed for the duration set in the “Boost duration” menu; afterwards the unit reverts to

selected speed.

Boost can be deactivated by holding BOOST button on the CTRL-DSP for 2 seconds.

User menu

1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu

It allows to set the duration of the boost speed.

Press Ok to select.

The factory setting (DEFAULT) is 15’.

Time options are 15’ - 30’ - 45’ - 60’.

Time is flashing: use



increase the time and



to decrease.

Press Ok to select.

User menu

1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu

It allows to reset the filter alarm after maintenance/replacement.

It can be selected only if the FILTER icon is displayed (Fig. 7.b - ).

Press Ok to select.

User menu

1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu

It allows to deactivate the automatic operation of the speed increased via sensors during

nocturnal hours.

It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect

and the unit runs at the selected continuous speed.

OFF is flashing: use





to chance to ON.

Press Ok to select.

The factory setting (DEFAULT) is OFF.

User menu

1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu

It allows to select the Installer menu.

Press Ok to enter the Installer menu.

Press ESC to go back to the previous menu.

Enter

installer menu?

Summary of Contents for QR280ABP

























Search results

Summary of Contents for QR280ABP

Reviews:

Related manuals for QR280ABP

Brands by name

Popular brands

aerauliqa QR280ABP, Installation Manual

Search results

Summary of Contents for QR280ABP

Reviews:

Related manuals for QR280ABP

Brands by name

Popular brands