27
• Keep the unit surface free from dust.
• Clean the filters every three months with a vacuum cleaner and replace the filters every year. This may differ per situation
depending on internal and external environmental conditions (Fig. 8.g-h-i-j-k).
• Clean the fans every year with a vacuum cleaner. This may differ per situation depending on internal and external environmental
conditions and on frequency of filter cleaning. Do not move the balance clips (Fig. 8.g-h-l-m-n-o-p).
• Clean the heat exchanger every year with a vacuum cleaner. This may differ per situation depending on internal and external
environmental conditions and on frequency of filter cleaning. To remove the heat exchanger unlock the specific bracket by
turning the yellow screw (Fig. 8.g-h-l-q-r).
• Check the condensation drainage: remove the front covers and, if necessary, clean the condensation tray. Check the U-bend
efficiency.
8.4 Service
WARNING
Make sure that the mains supply to the unit is disconnected before performing any installation, service, maintenance or
electrical work!
WARNING
The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in
accordance with local rules and regulations.
Fig. 8.l - max fastening torque 0,4Nm
Fig. 8.m
Fig. 8.k
Fig. 8.j
Fig. 8.i
Fig. 8.g
Fig. 8.h
Fig. 8.n
Summary of Contents for QR100M
Page 31: ...31 NOTE ...
