aerauliqa QHS Series, Specific Manual

Page: 10 / 20

10
QHS RANGE
Ceiling High Volume Low Speed Fan (HVLS)
INDEX
1.
GENERAL INFORMATION
10
2. PRECUTIONS 10
3. MAIN FEATURES 11
4. DATA 11
5. DIMENSIONS AND CLEARANCES 11
6. COMPONENTS 11
7. INSTALLATION 12
8. WIRING DIAGRAM 14
9. CLEANING 15
10. TROUBLESHOOTING 15
11. DECLARATION OF CONFORMITY/INCORPORATION 17
1. GENERAL INFORMATION
Carefully read the instructions contained in this manual.
This Specific Manual MUST be read in conjunction with the “Installation, Operation and Maintance General Manual”.
Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and
accessories without any obligation to update previous productions and manuals.
2. PRECAUTIONS
In addition to the precautions indicated in the “Installation, Operation and Maintenance General Manual” special attention should
be paid to the following warning notes:
- fixing: check/inspect and eventually retighten all the fixing annually.
- windy conditions: fans should not operate in case of strong wind (6m/s) and should not be installed in places where it is
frequently windy.
- weight: it is recommended that the building structure is capable to bear approx. twice the weight of the fan as well as a
torque of at least 350Nm. A professional structural engineer should perform an evaluation before purchasing the fan.
- key safety features: make sure that all the supplied key safety features are used to install the fan to provide a comprehensive
protection of people, animals, equipment and property.
The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation
is correct, in compliance with any national and local regulations.
G
Table 1 Use the values shown in the table to tighten all the screws supplied.
Size Nm
M6 9,5
M8 23
M10 46
M12 79
M14 127
M16 198
RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI
GRADE 8.8