aerauliqa MHS, Manual

Page: 15 / 24

15
16
3
3
2
1
5
7
4
6
4 6
5
7
15
Fig. I
Set di sicurezza (Fig.II)
Staffe di appoggio per
il trasporto in imballo
Fig. IV
15
15
Fig. III
Fig. V
• Remove from the main
body the three transport
feet (15) (Fig.VII), by
unscrewing the bolts,
washers and locknuts
• Fix the main body (15)
to the downrod (6) using
the M12 bolts (8), the flat
washer (9), the spring
washers (10) and locknuts
(11).
19
Fig. V
transport foot
Fig. VII
Fig. VIII
22
22
21
21
Fig. X
Fig. XI
• Connect the Ø3mm
stabilizing wires with
turnbuckle (16) to the
motor support using
the 5mm snap-hooks
(17) and stabilise the fan;
securely fix the other
end of the stabilizing
wires to the ceiling using
the clamps (18). Fixing
screws for the ceiling/
beam are not supplied.
45°
Fig. XI
23
Fig. XII
Fig. XII
Fig. XIII
Fig. IX
11
9 8
15
• Connect the electric
cable (5) to the motor
through the front cable
grommets, by removing
the upper cover to access
the internal terminal
block (for this operation
follow the instructions
indicated in the motor
manufacturer’s manual,
supplied)
• Let out the safety wire (1)
laterally, hooking the snap-
hooks (4) to the eyebolts
on the motor, verifying the
correct tightening.
5
4
Fig. X
16
17
17
16
1
6
10
18