26
Controls
LCD Functions
CHANGE TIME
• Press OK button for 3 seconds, time starts blinking.
• Change time with buttons. Time starts to change faster are pressed for a while.
• Press OK to confirm, current day starts blinking.
• Change day with buttons.
• Press OK to confirm
Press RUN / STOP to stop immediately and go back to normal operation
TIMER FUNCTION
The timer function can be used to program block times in which the unit is operating. Outside
the blocks the unit is off. The timer function makes it possible to program 2 on/off times per
day.
• Press TIMER button for 3 seconds, day MON starts blinking, all other LCD segments are off
• Press DAY button (one or more times) to select the day to be set
• Press OK to confirm, the selected day is permanent on
• The temp display shows
which means timer block 1 “on” time can be programmed
• Adjust the “on” time with the DAY and SCHEDULE buttons, press OK to confirm
• Next the timer block 1 “off” time can be programmed, the temp display shows
• Again adjust the “off” time with the DAY and SCHEDULE buttons, press OK to confirm
• Next the timer block 2 “on” time can be programmed, the temp display shows
• Adjust the “on” time with the DAY and SCHEDULE buttons, press OK to confirm
• The temp display shows
which means timer block 2 “off” time can be programmed
• Again adjust the “off” time with the DAY and SCHEDULE buttons, press OK to confirm
• Now the next day starts blinking and can be programmed accordingly as described above.
• To exit the programming mode press OK for 3 second or wait 1 minute
ADDITIONAL FEATURES
• A specific “on” or “off” time can be deleted by pressing RESET when programming the time
block. If deleted the time display shows:
and the time is not used.
• When for example the unit is “on” on Monday and no “off” time is programmed that day
anymore, the unit remains “on” until the first “off” time is reached the next day(s).The same
sequence is used when the unit would be “off”
