• Stereo-Simulation
The DOMINO is mono! Thus you find the same
effect signal on “R-Out“ and “L-Out“. These out-
puts are designed to connect AER active fullrange
systems to (AG8, CX8, AS Q8, AS 281) and adjust the
overall volume by the pre master independend from
the Domino volume. If you switch on the stereo
simulation now a more or less stereo like, broader
sound is generated. On stage, Domino as monitor
the sound stays unchanged.
• Insert
The insert loop is an input and output on a stereo
socket to link different effect devices (EQs, com-
pressors…) in serial mode with:
tip = send –> output and
ring = return –> input.
You can also use this insert as additional line output
separately or additional line input separately or to
link several AER-amps with insert function. (Domino,
Compact classic, AG8) For each function you need a
special cable accordingly. For the special AER link
function refer to see appd. 2.
Link mode secures that all signals of all connected
AER-amplifiers are audible on every connected amp
even with different effect settings without feed-
back. The only implication is, gains are depending
on each other. However linked amps in conjunction
with an active AER fullrange system work as a
complete reinforcement/monitor system easy to be
operated from the stage.
OK? We hope you enjoy your DOMINO!
Domino
2
C
-7-
