too high. You should then reduce the gain control or volume control on your guitar or
other source to ensure distortion-free reproduction. Then set the desired overall volume
with the
„Master“
control.
➧
Tone controls:
The three and two band tone controls of your
BINGO
are designed to fulfil the special
requirements of acoustic instruments and the general demands of other sources. The
„Colour“
switch in
Channel 1
activates a mid-cut treble-boost filter which is particu-
larly appropriate for fingerstyle techniques.
➧
Effects:
The
BINGO
has an integrated (internal) digital effect permitting you to choose be-
tween a reverberation and a delay effect with the
„Select“
switch. The
„Return“
switch
determines the intensity of the effect (as far to the left as possible means no effect).
Furthermore, a supplementary effect device can be connected (external effect). For this
purpose, use the sockets at the rear of
BINGO
„Send“
and
„Return“
(send to the input,
return from the output of the external effect). The intensity will then be set by the exter-
nal effect device.
Using the
„Effect-Pan“
control, you can mix continuously variable effect portions into
the channels. The following values hold for the corresponding definite positions:
turned completely to the left:
internal effect on channel 1
external effect on channel 2
middle position:
internal effect on channel 1 and channel 2
external effect on channel 1 and channel 2
turned completely to the right:
internal effect on channel 2
external effect on channel 1
A standard
double foot switch
can be connected to the „
Footswitch“
socket on the rear
of the amp with a stereo cable. This switch can be used to turn the internal and external
effects on and off.
Further outputs:
DI-out
The composite signal after tone control but without effect and before
master control is on the XLR socket. (Appropriate to connect the
BINGO
to a sound system.)
Tuner
A tuner can be connected to this output, and need not be switched
between instrument and amplifier, as is often the case. This precludes
any effect on the sound.
Line out
The composite signal after tone control, with effect and after master
control is connected here. (This output can be used for tape recordings).
O.K.? We hope you enjoy your
BINGO
!
BINGO
4
Part of the action
A
