Channel 2:
Input
XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
Line/Mic
switch to adjust input sensitivity
Line:
sources with line level, instruments with active preamplifiers
and magnetic sound pick-ups,
Mic:
symmetrical microphone input
with 30 V phantom source
Clip
overload indicator
Gain
input level control
Bass
tone control for bass
Treble
tone control for treble
Eff. Pan
panorama control to distribute the effects between the channels
Select
switch for two effect programmes (reverberation, reverberation/delay)
Return
level control for the internal effect
Power
power indicator lamp
Master
level control for the overall volume
Rear (from left to right):
Phones
headphone output
Tuner
output for a tuner after the master control
Line-out
preamplifier output after the master control
DI-out
XLR output before the master control
Send
output for an external effect device
Return
input for an external effect device or another signal source, for example
CD player
F/S
connection for a double foot switch with which the effects can be
switched on and off
(See 4. Summary of Operations)
.
Power
combined mains switch with a mains socket and a fuse holder
(1 A slowblow)
4. SUMMARY OF OPERATIONS
➧
Connecting and starting-up:
Check to ensure that the mains voltage at your location corresponds to what is permit-
ted for operating the
BINGO
. You will find the necessary information on the rear side
under
„Dest.“
(country of destination) and
„AC-voltage“
. Before switching the amp on,
the
„Master“
and
„Return“
controls should be turned to the
zero position
(as far left as
they will go) and
all other controls to middle position
. Then make all necessary cable
connections (mains, instrument and/or microphone). Now you can switch on your
BINGO
with the power switch on the rear of the amp. The green power indicator shows
that the amp is operational.
➧
Level control:
You can use the „
High/Low“
switch and the „
Gain“
control to adjust the various pick-up
systems and signal sources to
BINGO
. The clip indicator shows that the input signal is
BINGO
3
Part of the action
A
