.
AEQ PAW120
20
Press the “
” key once to set the first edition marker (A) during play or record; press the
“
” key a second time to set the second marker (B). Press as well the “
” key, to
move from one marker to the other one. Press and hold the “
” to cancel selection. If you
want to save the selected section in a new file, press the “
OK
” key (this new file name is the
same but with a number 1 at the end; if you make several selections new files will be created
ended on 1, 2, 3...).
Once the 2 markers are set, if you press the “
” key, it will start the playback of the 3
seconds before the marker A, then it will jump over the marked area and will play the 3 seconds
after the marker B. This allows you to verify the playback before cutting. If the AGC switch is
moved to “
ON
” position, when you press the “
” key the section between the 2 marker will
be played back.
If after verifying, the edition markers are in the right place, press the “
” key and the marked
area will be removed.
If after verifying, one of the markers is not in the right place, it must be moved. In the stop mode,
first select the misplaced marker by pressing the “
” key . By pressing the “ “ and “ “
keys, the marker will move step-by-step to left and right respectively. If the key is pressed and
held, the marker will move at bigger intervals. If the same action is repeated during play, the
corresponding marker will automatically jump to the play head position.
If you edit several times a file, you can return to any of the previous situations by pressing the
“
” key three times and selecting one of the files of the list that appears.
Once the file is edited, edition can be saved by pressing the “
C
” key . A sub-window appears
giving the possibility to return to the edit window by selecting “
Cancel
”, to abort the edition by
selecting ”
Don´t
” or to save the changes by selecting “
Save
”.
After editing, the original audio file is not at all modified. The editing information is stored in
separated data files. When this audio file is copied to the PC or MAC it still has his original file
length, but when this file is played back on the machine, it will only playback the parts decided
by the editing.
If you need a file where these changes are applied, go to the “MANAGER” menu to select the
edited file, press “
OK
”, then “
Wipe
” and press “
OK
” again. This function creates a new file that
is a copy of the original audio file where the edition cuts have been applied.