.
AEQ PAW120
11
2.3. PLAYBACK.
The AEQ PAW120 can play back files irrespective of the current compression mode selected.
- To
playback
the last recorded file, press ”
” and the machine starts playback
immediately.
- To
stop
the playback, press the “
” key again.
- To
pause
the playback, use the ”
“
key.
If recording was made with markers, during the playback press shortly the “
” key to jump to
the next marker position.
To playback another file from the same working directory, use the “ ” or “ ” keys to scroll
through the recorded files available. Once “
” is pressed, the selected file will be played
immediately.
During a playback of a file, the full play progress bar corresponds to the total length of the file.
When a new file has been selected for playback the “
TOTAL TIME
” counter will indicate its full
length and the “
PLAY TIME
” counter starts increasing once the playback begins.
To REWIND during playback, press and hold the “ ” key, to go FORWARD press and hold
the “ ” key.
2.4. PLAYBACK LEVELS ADJUSTMENT.
The output volume level for the headphones and line output can be adjusted by the right side
Buttons “
+ VOL –
“ in steps of 0.5 dB from -40 dB up to +1 dB. This value is also shown on the
display and stored in the memory.
2.5. SETTINGS STORAGE IN A TEMPLATE.
Templates are used to store the custom settings for the AEQ PAW120. These templates contain
settings of: input device, levels, filter selection, microphone powering, type of compression,
mono or stereo mode, etc.
- Input devices: 10 templates are available and each can store the name and
characteristics of different input devices such as microphone capsules or line inputs.
The gain setting and powering filters can be selected for each device.
-
Compression templates: 10 templates are available and each can be given a dedicated
name and can store the desired compression mode, sampling frequency, bit rate and
file extension.
Templates configuration is explained on “SETUP MENU” chapter in this manual. Once
completed, the desired template can be selected by pressing the “
MENU
” key. Choose the
corresponding template by its name in the “
Set compress template
” or “
Set input device
”.
2.6. FAST DELETING AN AUDIO RECORDING.
Any audio file can be selected from the “
STOP
” mode by pressing the “ ” or “
”
keys. Once
the corresponding file is shown on the display, press the “
” key and confirm to delete the
file.