BC 2000 DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centres
.
ARENA DM CONTROL SURFACE
FUNCTIONAL DESCRIPTION
45
3.2.6.7. Signal Processing Changes.
This option allows you to monitor the changes regarding parameters (phase, mode and
balance) and processes (dynamic, equalization, filtering and test signals) of each one of
the control surfaces channels in relation to initial configuration (or to the last one
accepted). It also allows you to accept those changes or undo them and fall back to the
last accepted configuration.
This function is available only when “
Changes Monitoring
” option is active in the
configuration you sent (if this is not active, the system allows you to access to “Signal
Processing Changes” option but the changes list will always be empty).
When a change of parameters or processes is done in any of the control surfaces
channels, a blinking
warning signal
is shown in the special functions display of the DM
control surface (up on the left). If you select “Signal Processing Changes” option in
“System Setup”, a list of “Signals” and “Changes” will be shown
Then you can accept changes or undo them and fall back to the last accepted
configuration; you can make this approval of changes for all the listed signals, by
pressing “ACCEPT ALL”, or just for one of them (the one selected in the list), by
pressing “ACCEPT SIGNAL”. In this way you can also undo the changes for all the
listed signals by pressing “RESTORE ALL” (in this case the system asks the user for a
confirmation) or just for the one selected by pressing “RESTORE SIGNAL”.
The options that may appear in “Changes” column are:
•
EQU:
Indicates changes in signal equalization.
•
FIL:
Indicates changes in signal filtering.
•
DYN:
Indicates changes in dynamic processes applied to the signal.
•
TON:
Indicates changes in channel test signals activation.
•
BAL:
Indicates changes in signal balance.
•
PHA:
Indicates changes in signal phase.
•
MOD:
Indicates changes in signal mode (only for stereo signals).
