AEQ
AM
‐
03
Self
‐
powered
Stereo
Audio
Monitor
4.3.4. Stereo signal presence in phase
In the case the equipment is receiving an stereo signal in phase, the phase meter will
present the following aspect (fig. 7).
4.3.5. Monoaural signal presence in phase
Incase that the signal present in both channels is monoaural, and it is in phase, the
phase meter will present the aspect show in figure 8.
4.3.6. Stereo signal presence out of phase
In case that the signal received by the equipment is stereo, but out of phase, the
display of the phase meter will have the aspect as in figure 9.
4.3.7. Monoaural signal presence out of phase
In the case that the signal received is monoaural, and out of phase, the display of the
phase meter will have the aspect as shown in figure 10.
4.4. Headphones
monitoring
4.4.1. Headphones
connector
The headphones connector (1) gives the opportunity to carry out a direct monitoring.
The disconnection of the speakers will be done automatically when the headphones jack is
inserted on the connector. All the controls (gain, balance, etc.) will remain operative in this
listening mode.
FIGURE 7
FIGURE 8
FIGURE 9
FIGURE 10
