If you’re using a Z-Stick:
Action
Button
1. If your Z-Stick is plugged into a gateway or a
computer, unplug it.
2. Take your Z-Stick to your Recessed Door
Sensor. Hold the Action Button on your Z-Stick
for 3 seconds.
3. Press the Z-Wave Button on your sensor
with a small pin or toothpick.
4. If your sensor has been successfully removed
from your network, its LED light will blink for
3 seconds when you press the Z-Wave Button.
If the removal was unsuccessful, its LED light
will remain illuminated for 3 seconds.
5. Press the Action Button on your Z-Stick to
take it out of removal mode.
If you’re using a Minimote:
1. Take your Minimote to your Recessed Door
Sensor.
2. Press the Remove button on your Minimote.
3. Press the Z-Wave Button on your sensor with
a small pin or toothpick.
4. If your Recessed Door Sensor has been
successfully removed from your network,
its LED light will blink for 3 seconds when
you press the Z-Wave Button. If the removal
was unsuccessful, its LED light will remain
illuminated for 3 seconds.
5. Press any button on your Minimote to take it
out of removal mode.
Remove
Reset your sensor.
At some stage, you may wish to reset all of
your Recessed Door Sensor’s settings to their
factory defaults. To do this, press and hold the
Action Button for 20 seconds and then release
it. Your sensor will now be reset to its original
settings.
Technical specifications.
Warranty.
Aeon Labs warrants to the original purchaser
of Products that for the Warranty Period (as
defined below), the Products will be free from
material defects in materials and workmanship.
The foregoing warranty is subject to the proper
installation, operation and maintenance of
the Products in accordance with installation
instructions and the operating manual supplied
to Customer. Warranty claims must be made
by Customer in writing within thirty (30) days of
the manifestation of a problem. Aeon Labs' sole
obligation under the foregoing warranty is, at
Aeon Labs' option, to repair, replace or correct
any such defect that was present at the time
of delivery, or to remove the Products and to
refund the purchase price to Customer.
6
Operating distance: Up to 300feet/100metres
outdoors.
Battery: Lithium cell CR2, 3 volt battery, 800mAh.
Operating temperature: -10 to 50 .
Relative humidity: 8% to 80%.
C
C
The "Warranty Period" begins on the date the
Products is delivered and continues for 12
months.
Any repairs under this warranty must be
conducted by an authorized Aeon Labs service
representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized
persons shall void this warranty.
Excluded from the warranty are problems
due to accidents, acts of God, civil or military
authority, civil disturbance, war, strikes, fires,
other catastrophes, misuse, misapplication,
storage damage, negligence, electrical power
problems, or modification to the Products or its
components.
Aeon Labs does not authorize any person
or party to assume or create for it any other
obligation or liability in connection with the
Products except as set forth herein.
Aeon Labs will pass on to Customer all
manufacturers’ Material warranties to the extent
that they are transferable, but will not
independently warrant any Material.
Customer must prepay shipping and
transportation charges for returned Products,
and insure the shipment or accept the risk of
loss or damage during such shipment and
transportation. Aeon Labs will ship the repaired
or replacement products to Customer freight
prepaid.
Customer shall indemnify, defend, and
hold Aeon Labs and Aeon Labs' affiliates,
shareholders, directors, officers, employees,
contractors, agents and other representatives
harmless from all demands, claims, actions,
causes of action, proceedings, suits,
assessments, losses, damages, liabilities,
settlements, judgments, fines, penalties,
interest, costs and expenses (including fees
and disbursements of counsel) of every kind (i)
based upon personal injury or death or injury
to property to the extent any of the foregoing
is proximately caused either by a defective
product (including strict liability in tort) or
by the negligent or willful acts or omissions
of Customer or its officers, employees,
subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged
infringement or misappropriation of any patent,
trademark, mask work, copyright, trade secret
or any actual or alleged violation of any other
intellectual property rights arising from or in
connection with the products, except to the
extent that such infringement exists as a result
of Aeon Labs' manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BY CUSTOMER OR ANY THIRD PARTY, WHETHER
IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY,
BREACH OF AGREEMENT, OR EQUITABLE
PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON
LABS' OPTION, REPLACEMENT OF, OR REPAYMENT
OF THE PURCHASE PRICE FOR THAT PORTION OF
PRODUCTS WITH RESPECT TO WHICH DAMAGES
ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING
IN CONNECTION WITH THIS AGREEMENT OR THE
SALE OR USE OF PRODUCTS SHALL BE DEEMED
WAIVED UNLESS MADE IN WRITING WITHIN THIRTY
(30) DAYS FROM AEON LABS'S DELIVERY, OR THE
DATE FIXED FOR DELIVERY IN THE EVENT OF
NONDELIVERY.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1
2
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation. This equipment
has been tested and found to comply
with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
THE INDEMNITY AND WARRANTY IN ABOVE
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE
FOR DRY LOCATIONS. DO NOT IMMERSE IN
WATER. NOT FOR USE WHERE DIRECTLY
EXPOSED TO WATER.
FCC NOTICE (for USA)
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consul the dealer or an experienced
radio/TV technician for help.
Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities.
Contact your local government for information
regarding the collection systems available.
Warning
Version:501008900001-AA www.aeotec.com
Z-Wave and Z-Wave Plus are
registered trademarks of Sigma
Designs and its subsidiaries in the
United States and other countries
Certifications (regional):
