Quick start.
Adding your Range Extender into a Z-Wave network.
Getting your Range Extender up and running is as simple as plugging it into a wall outlet and adding it to your
Z-Wave network. There are 2 methods to pairing your Range Extender depending on the capabilities of your Z-
Wave gateway/controller/hub.
SmartStart Inclusion.
You can use this method of inclusion only if your Z-Wave gateway/controller/hub supports SmartStart.
1.
Open up your Z-Wave gateway/controller/app.
2.
Select SmartStart inclusion.
3.
Scan the QR code located on the Range Extender 7.
4.
Within 10 minutes after powering your Range Extender 7, it will automatically get included into your
Z-Wave gateway/controller/hub.
LED will flash for 1 second after Repeater is powered, if successful, the LED will become a solid bright
light for 2 seconds.
Classic Inclusion.
1. Decide on where you want your Range Extender to be placed and then plug it into a wall outlet.
