Factory reset your Aeotec Water Leak Sensor
Aeotec Water Leak Sensor can be factory reset at any time if you come across any issues, or if
you need to re-pair Aeotec Water Leak Sensor to another hub.
Steps in SmartThings Connect
1.
Press and Hold the recessed connect button
for five (5) seconds.
2.
Release the button
when the LED starts blinking red.
3.
The LED will blink red and green while attempting to connect.
4.
Use the SmartThings app and steps detailed in "Connect the Aeotec Waterleeak Sensor"
above.
SmartThings Water Leak Sensor technical specifications
Modified on: Wed, 17 Feb, 2021 at 9:43 PM
This page lists Aeotec
product technical specifications for Aeotec Water Leak Sensor.
Name:
Aeotec Water Leak Sensor
Model number:
EU:
GP-AEOWLSEU
US:
GP-AEOWLSUS
AU:
GP-AEOWLSAU
Hardware required:
Aeotec Smart Home Hub
Software required:
SmartThings Connect (iOS or Android)
Radio
protocol
:
Zigbee3
Power supply:
No
Battery charger input:
No
Battery type:
1 * CR2
Radio frequency
: 2.4 GHz
Sensor:
Water leak
Temperature
Indoor/Outdoor use:
Indoor only
Operating distance:
50 - 100 ft
15.2 - 40 m
Dimension of Button:
2.32 x 1.65 x 0.79 in
60 x 36 x 24 mm
Weight:
47 g
1.76 oz
