Connect the Aeotec Water Leak Sensor
Steps in SmartThings Connect
1.
From the Home screen, tap the
Plus (+) icon
and select
Device.
2.
Select
Aeotec
and then
Water Leak Sensor (IM6001-WLP)
.
3.
Tap
Start.
4.
Choose a
Hub
for the device.
5.
Choose a
Room
for the device and tap
Next.
6.
While the Hub searches:
•
Pull the “
Remove when Connecting
” tab found in the sensor.
•
Scan the code
on the back of the device.
Using Aeotec Water Leak Sensor
Aeotec Water Leak Sensor is now a part of your Aeotec Smart Home Hub network. It will appear
as a water sensor widget that can display leak status or temperature sensor readings.
This section will go over how to display all information in your SmartThings Connect app.
Steps in SmartThings Connect.
1.
Open SmartThings Connect
2.
Scroll down to your
Aeotec Water Leak Sensor
3.
Then
tap Aeotec Water Leak Sensor widget
.
4.
On this screen, it should display:
•
Water leak
•
Temperature
You may use water and temperature sensor in an Automation to control your Aeotec Smart Home
automation network.
How to remove Aeotec Water Leak Sensor from
Aeotec Smart Home Hub
If your Aeotec Water Leak Sensor is not performing as you expected, you'll likely need to reset your
water leak sensor and remove it from Aeotec Smart Home Hub to begin a fresh start.
Steps
1. From the Home screen, select
Menu
2. Select
More Options
(3 dot icon)
3. Tap
Edit
4. Tap
Delete
to confirm
