1.
Unlock the Back Mount Plate of Garage Door Controller by twisting the Back Mount
Plate and separating the two parts of your Garage Door Controller.
2.
Power your Garage Door Controller by connecting the 5V DC Adapter to the input.
3.
Now that your Garage Door Controller is powered on, you will see the Network LED
blinking slowly. Bring your gateway into the inclusion mode and press the Z-Wave
button of the garage door controller.
Reset
To reset the device press and hold the Z-Wave Button for 20 seconds and then release it. Your
Garage Door Controller will now be reset to its original settings, and the Network LED will
be solid for 2 seconds and then start slow blinking to confirm a success.
Technical Specifications
•
Model Number: ZW062
•
Power Supply: 5V DC Adapter for Garage Door Controller. CR2 Lithium battery 3V,
800mA for Sensor.
•
Max Alarm Power: 2W.
•
Max Standby Power: 1W.
•
Max Volume: 105dB.
•
Operating Temperature: -10 to 45 .
•
Storage Temperature: -20 to 70 .
•
Supported Audio Formats: MP3 and WMV within the bit rate of 320 Kbps.
•
Operating Distance: Up to 980 feet/300 metres outdoors.
Operating the device
Associations
