1. Lower the Tub Basin onto the Electric Base
Insert left and right bolts and securely tighten them with Nuts
.
2. Evenly fill the bottom gaps of the Tub Basin with Silicone glue Sealant Gun.
3. Position the Drain Head in the Tub Basin opening and apply some Silicone glue to the contact
surface between the drain head and the drain hole. Securely bolt to Drain Hose w/Hoop.
4. Lay both plastic Footboard and place Plastic Stool into the Tub Basin.
1. Use only as described in this manual. Use only manufacturer's recommended attachments.
2. DO NOT leave the appliance plugged in when not in use. Unplug from outlet when not in
use and before servicing.
3. To reduce the risk of fire, or electric shock – DO NOT use outdoors or on wet surfaces. DO
NOT place the product on an uneven or soft ground.
4. This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the product by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the product.
5. DO NOT use with damaged cord or plug.
6. DO NOT cut, damage, or modify the cord. DO NOT pull or carry by cord, use cord as a
handle, close door on cord, or pull cord around sharp edges or corners. DO NOT pull, twist, or
bend the cord with unnecessary force.DO NOT run the product over cord. Keep cord away
from heated surfaces. DO NOT place heavy objects on the cord or allow the cord to get
pinched in between objects. DO NOT wind the cord around the product.
02
03
Parts List
Assembly instructions
7. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord.
8. DO NOT handle plug or the product with wet hands.
9. Turn off all controls before unplugging.
10. DO NOT use the product near flammable or combustible liquids such as gasoline or use in
areas where they may be present. The fumes from these substances can create a fire hazard
or explosion.
11 .DO NOT modify, disassemble or repair.
12. Make sure the local voltage and frequency of the power meet the requirements on the
label of the product.
13. Avoid using the product in dusty, vibrating and wet environment and in chemical storage
place.
14. No people or animals are allowed to be under the tub especially when it is power-on.
15. Gently control the tub to rise or go down slowly and safely.
(A) Electric Base
(B) Tub Basin
(C) Plastic Footboard
(D) Plastic stool
(E) Bolts (M10×0.45)
(F) Drain head
(G) Drain Hose w/Hoop
(H) Silicone Glue Sealant Gun
