Parts List
(the number in the [] indicates the quantity of the part)
Assembly Instructions
- 3 -
- 2 -
away from heated surfaces. DO NOT place heavy objects on the cord or allow the cord to get
pinched in between objects. DO NOT wind the cord around the product.
6. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord.
7. DO NOT handle plug or the product with wet hands.
8. Turn off all controls before unplugging.
9. DO NOT use the product near flammable or combustible liquids such as gasoline or use in
areas where they may be present. The fumes from these substances can create a fire hazard
or explosion.
10. DO NOT modify, disassemble or repair.
11. Make sure the local voltage and frequency of the power meet the requirements on the label
of the product.
12. Avoid using the product in dusty, vibrating and wet environment or in chemical storage
place.
13. Neither people nor animals should be under the tub when while the power is on.
(A) Electric Base [1]
(B) Tub Basin [1]
(C) Bolts(M10*0.45) [4]
(D) Plastic Footboard [2]
(E) Plastic Stool [1]
(F) Bolts(M5*0.1) [4]
(G) Restraint Ring [2]
(H) Drain Head [1]
(I) Drain Hose w/ lock collar [1]
(J) Sprayer Hook/Holder
1. Place the Tub Basin(B) onto the Electric Base (A). Insert the bolts (C) onto both sides and
securely tighten them with Nuts.
2. Flip over the left splash board and the back splash board. Fasten the two boards with the
buckle set.
3. Flip over the right splash board. Fasten the right and back splash board with the buckle set.
4. Screw the Bolts (F) to secure Restraint Ring (G) and The Sprayer Hook/Holder (J) onto Tub
Back Splash (B)
