AENO AVS0002, User Manual

Page: 8 / 120

8 aeno.com/documents
removing the power cord plug from the outlet and allow to cool. Wipe the
surface of the device with a soft cloth soaked in warm water or a weak soap
solution. Then wipe with a soft cloth soaked in clean water and wipe dry. Do
not use harsh detergents, abrasive pastes, polishes or detergents containing
acids or solvents.
7.
Use "Moist" mode only for products with a small amount of liquid.
8. Do not vacuum liquid food, it is only suitable for sealing.
9. Use only special bags for vacuum sealers.
10. The adapter (vacuum hose) supplied with the vacuum sealer is only used to
evacuate air from special vacuum containers.
11.
It is recommended to dry wet foods with a clean towel or cloth before
vacuuming.
12.
Before putting vacuum-packed foods into microwave, make a hole in the
package or open the outlet valve in the container to release steam.
13.
Use only manufacturer-recommended accessories, consumables and/or
replacement parts. For more information see the full manual available for
download at aeno.com/documents.
14.
After use the device should be left to cool down.
15. During storage in order not to deform the seal (12) and thus not to impair
the performance of the device, it is recommended to close the cover loosely
without locking the locks (8).
16.
Do not allow children to use and/or play with the device.
Device control
Automatic vacuuming and/or sealing of packages
1.
Connect the device to a power source by connecting the power cord to the
device and then plugging the power cord into a power outlet.
2.
Place the food in a vacuum bag. Gently secure the open edge of the bag with