Installation and Operation Manual
AENO
TM
electric blender
©
ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.2, aeno.com
Page
21
of
47
The device will go into standby mode. The control panel display will show "00:00". All
indicators will light up blue.
If no buttons are pressed after this, one (1) minute later the blender will go into power
monitoring mode.
1.5.4 Operating mode of the device
To activate the operation mode, place the bowl with the ingredients on the blender
body and perform the following actions:
•
Plug the device into an outlet.
•
Press the "ON/OFF" button.
•
Select the desired operating program of the device by pressing the "Function"
button and press the "ON/OFF" button.
•
If "ON/OFF" button is not pressed after selecting a program, the blender will go
into standby mode thirty (30) seconds later.
The device will start executing the selected program. The indicator of the
selected program will light up blue. The display of the control panel will show
the temperature of the ingredients contained in the bowl.
For programs with heating after boiling, the display will show the operating time of
the selected cooking program. For programs without heating the running time is
displayed immediately after the mixing starts.
Table 4
–
Cooking programs
Control panel
button
Program
Operating
time (after
boiling)
Maximum
heating
temperature
«Soy Milk»
Soy milk
23 min
100 °C
«Rice Paste»
Rice paste
15 min
100 °C
"Porridge"
Porridge
17 min
100 °C
"Thick Soup"
Thick soup
20 min
100 °C
"Fruits/Vegetables" Fruits/Vegetables
2 min
unheated
"Smoothie"
Smoothie
1 min
unheated
"Grind"
Shredding
1 min
unheated
"Steam"
Steam
20 min
100 °C
