Installation and Operation Manual
for AENO TB2 electric blender
Document version: 1.0.1, aeno.com
©
ASBISc Enterprises PLC. All rights reserved
Page
34
of
44
3.2 Cleaning the jug and accessories
To clean the inner surface of the jug use the self-cleaning mode of the device described
in paragraph 1.5.6 "Self-cleaning mode". To clean the outer surface of the jug, wipe it
with a damp cloth, adding a neutral detergent. Then wipe dry with a dry cloth.
Figure 15
–
Cleaning the Bowl
Use the supplied brush to clean the knife mechanism of the jug.
WARNING!
In the handle of the jug of the device there are electric contacts of the big lid
fixing, for which the contact with water is forbidden (see the figure below). If
liquid gets on the handle of the jug, you should dry the jug for at least 24 hours
before the next use, turning it upside down.
Summary of Contents for ATB0002
Page 2: ......
