Installation and Operation Manual
for AENO TB2 electric blender
Document version: 1.0.1, aeno.com
©
ASBISc Enterprises PLC. All rights reserved
Page
32
of
44
Then start the self-cleaning mode of the device as described in paragraph 1.5.6 "Self-
cleaning mode". It is recommended to clean the device immediately after finishing
work to prevent food residue from drying on the walls of the device and the knife
mechanism.
2.4 Overload and overheat protection
The device is equipped with overload and overheat protection.
If the device shuts down automatically during operation, unplug the power cord and
remove the jug. Make sure that the knife mechanism of the jug is not blocked by the
food in the jug and can turn freely.
Stop the device for 15 minutes. After this time has elapsed, the device can be used
again.
Summary of Contents for ATB0002
Page 2: ......