AENO ASC0003, User Manual

Page: 8 / 118

8 aeno.com/documents
the power adapter if the plug or cord is damaged. Do not attempt to vacuum
flammable objects (cigarette butts, matches, ashes) or excessively crushed
construction debris (e.g., lime, cement, plaster powder), large sharp objects and
fragments (e.g., glass, nails, needles), aggressive liquids (solvent, cleaner, acids),
flammable or explosive liquids (e.g., gasoline, alcoholic products). Keep hair,
loose clothing, fingers and other body parts away from the air duct and moving
parts of the cleaner. Do not point vacuum cleaner air tube, handle or other tools
at eyes, ears or other sensitive areas of the body. Carefully examine the area to
be cleaned before turning on the vacuum cleaner. If it contains large pieces or
lumps of paper, plastic or cloth, sharp objects, or objects larger than the
diameter of the vacuum cleaner tube, remove them from the cleaning area
beforehand. Otherwise, the tube of the vacuum cleaner may get clogged,
which will decrease its suction power. If the cleaner gets too hot, you hear an
abnormal sound, the suction power has decreased, or there is an unpleasant
odor, stop using it immediately. Inspect the dust container regularly. If there is
a lot of rubbish and dust in it, clean it out.
Assembly and operation
Attach the extension tube to the vacuum cleaner housing , pushing the
tube into the slot until it clicks into place. To the other end of the extension
tube, attach one of the brushes , or , insert the brush into the groove
of the tube until it clicks into place (see figure c). You can also attach the
brushes directly to the vacuum cleaner housing (without the metal extension
tube). You must charge the vacuum cleaner before using it for the first time. To
do this, attach the charging base
together with the power adapter
rigidly attached to the wall using the wall mount kit .
NOTE. The charging base should be at least 1 meter above the floor and no
further than 1 meter from an AC power outlet.