AENO AHB0001, Quick Start Manual

Page: 14 / 142

14
Table 3. Switching On/off (Figure 2)
Model Switching on Switching Off
AHB0001 Press and hold the speed
control panel (a) or the
speed button (b) Release the speed
control panel (a) or
the speed button (b)
AHB0002 Press the lock panel (a)
than press and hold the
switch (b). The speed is
set by the pressure of
the switch Release the switch (b)
AHB0003 Move switch (a) to the
"unlocked" position,
press and hold the speed
selector (b) Release the speed
selector (b), move the
switch to the "locked"
position (a)
Assembly and operation of the device
Stick blender (Figure 3):
1. Attach the stick (1b) or (1c) to the motor part (1a)
and plug the power cord into the power outlet.
2. Put the blender into the beaker with food. Keep in
mind that the level of the product should be above the blade.
Switch on the blender by selecting the desired speed (Table 3).
3. Move the blender up and down and around.
Chopper (Figure 4):
1. Holding the blade (1e) by the plastic part, place it
onto the bowl shaft (1f).
2. Put the food into the bowl (1f), cutting it beforehand
if necessary. Close the lid (1d), attach the motor part (1a).
Insert the plug into the power outlet and switch on the blender
(Table 3).
Whisk (Figure 5):