aeno.com/documents
9
the Child Lock Mode where all buttons will be locked. To disable the Child Lock
Mode, press and hold the button again for 3 seconds;
The button
(UV/FILTER) used to turn on the UV diode for disinfection. If
you press this button again, the UV diode will be turned off.
After 2,200 hours of operation, the HEPA filter will be completely dirty. In this case,
the UV/FILTER LED will start blinking red. You may stop it by pressing and holding
this button for at least 7 seconds.
Maintenance
Make sure the purifier is turned off and unplugged before cleaning or replacing
the HEPA filter. Remove the HEPA filter from the device body to clean it from
dust. Shake off dust and dirt, and remove residues with a dry cloth or brush
only. Use a soft cloth with a neutral (non-aggresive) detergent to remove dust
or large pieces of dirt from the surface of the HEPA filter. The HEPA filter shall
be installed back in the purifier casing after cleaning. If the device is not
planned to be used for a long time, please store it covered with a dustproof bag
in a dry, cool and well-ventilated area. It is also recommended to power on the
device from time to time for at least a few minutes in order to keep it in a good
working condition.
Troubleshooting
1.
The purifier does not turn on. Possible causes and solutions: Make sure that
the purifier is plugged into the mains socket, and that there is no power
supply failure, as well as that the circuit breaker is on, and that the fuses are
intact, and that the filter change LED is blinking red.
2.
Dust is poorly removed. Possible causes and solutions: Make sure that the
filter surface is not clogged and that there are no obstructions preventing air
intake or discharge.
3.
The device makes a loud noise. Possible causes and solutions: Make sure that
nothing is stuck in the fan, and that the purifier is not tilted. If the noise is still
too loud, try to reduce the fan speed using MODE button. Also, use Sleep
Mode to operate the purifier at night.
4.
Unpleasant odor coming out from the purifier. If the device emits a plastic
smell during the first few hours of operation, this is deemed to be normal.
Summary of Contents for AAP0001S
